Mobile home and RV park leak detection is a focused field service for operators who need to locate unexplained water loss in a private distribution system. Shared mains, long service runs, limited shutoff points, varied pipe materials, irrigation, and occupied sites can make trial-and-error excavation expensive and disruptive.
This page explains what to expect when requesting a professional survey or targeted leak investigation. Operators developing a longer-term measurement and conservation plan can also read our mobile home park water-conservation program guide.
When to Schedule a Park Leak Investigation
A field investigation may be appropriate when master-meter use remains elevated after normal demand is considered, flow continues during low-use hours, pressure drops without an obvious cause, wet ground repeatedly appears near private utilities, or repaired areas fail to explain the full loss. The first step is to determine whether the concern is system-wide or limited to a branch, building, irrigation zone, or individual service.
Information That Helps Define the Scope
Useful records include recent water-use statements, master- and submeter data, known pipe materials and sizes, available system maps, valve and meter locations, irrigation schedules, prior leak repairs, and any areas with visible symptoms. We also identify operating constraints before testing, including occupied units, facilities that cannot lose water, fire-protection systems, and valves that should not be operated without site authorization.
How Mobile Home and RV Park Leak Detection Works
System review and isolation: Meter behavior, pressure, valve configuration, and available submeter information are used to narrow the active area. Isolation is performed only when it is safe, authorized, and useful to the investigation.
Line locating and targeted testing: Depending on pipe material, depth, access, background noise, and operating conditions, the work may use acoustic listening, leak correlation, tracer gas, pressure observations, utility tracing, or ground-penetrating radar. No single technology is appropriate for every distribution system.
Marking and documentation: Where the evidence supports a suspected location, the area is marked and the relevant observations are documented. Findings may also identify a branch or zone that needs further isolation when conditions do not support a single point.
Deliverables and Limitations
The objective is to give the owner or repair contractor a narrower, evidence-based area of concern. Results depend on system access, valve condition, pipe material, leak size, soil, depth, site noise, and whether the line can be operated under suitable conditions. A marked location is diagnostic guidance, not a guarantee of the precise failure point or a substitute for safe excavation practices and required utility locating.
Subsurface Leak Detection provides diagnosis and documentation; repair work should be completed by the appropriate qualified contractor selected by the owner. For broader private networks and shared systems, review our water-distribution system leak-detection services.
Request a Mobile Home or RV Park Survey
Contact Subsurface Leak Detection with the property location, approximate system size, current water-loss concern, available meter data, and known access limitations. We will use that information to determine whether a targeted investigation or a broader survey is the better starting point.
